RMK Billing · RMK Utility
RMK Utility: every print on the right printer, by itself
Last updated
RMK Utility is a small free program for the Windows computers in your shop. With it, RMK Billing prints bills on the receipt printer, job slips on the workshop printer and reports on the office printer, straight away, with no print dialog and no choosing. Phones and tablets print on the shop printers too.
RMK Utility for Windows
Version 1.3.0 · about 1 MB · Windows 10 and 11
- ✓ Free with every RMK Billing plan
- ✓ Installs for you in seconds, no administrator needed
- ✓ Starts with Windows and waits by the clock
Works only with RMK Billing. It prints what RMK Billing sends to it and nothing else: it is not a printer driver for other software.
What RMK Utility does
RMK Utility was called RMK Print until version 1.3.0. Opening the new download replaces RMK Print by itself.
- Prints by the printer’s name, with no dialog. Each print type (bills, estimates, receipts, credit notes, refunds, job slips, passbooks, challans, vouchers, purchase orders, reports) goes to the printer you chose for it.
- Prints by itself after saving, when you switch that on for a print type: issue a bill and it is already printing.
- Phones and tablets print on shop printers. A salesperson bills on a phone and the bill prints at the counter.
- Shows which printers are online on every device: ● Online or ○ Off now, next to each printer in Settings → Printers.
- Plays a short chime on the printing computer when a print starts, so the counter knows something is coming out.
- Thermal printers on the network (80 mm or 58 mm) can print by their IP address, with the paper cut after each print.
How printing works
When anyone presses Print in RMK Billing, or a bill prints by itself after saving:
- RMK Billing looks up the printer for that print type in your printer set-up (Settings → Printers).
- On the computer with that printer: RMK Billing hands the pages to RMK Utility on the same computer, which prints them on that printer at once.
- On a phone, a tablet or another computer: the print is sent, safely through your RMK Billing account, to the computer the printer is on. RMK Utility there prints it within a second or two and the pages are removed.
- No computer with that printer is on: the device’s own print screen opens and tells you which printer to pick, so you can still print.
Before you start
- A Windows 10 or Windows 11 computer with the printers connected and installed in Windows (Settings → Bluetooth & devices → Printers & scanners). Print a Windows test page on each one first.
- Internet on that computer (for prints from phones and other computers).
- Your RMK Billing owner login, to get your business’s connection code.
- Nothing else to install: RMK Utility uses parts that come with Windows (.NET and Microsoft Edge WebView2).
Step 1
Download and install
- On the computer with the printers, click Download RMK Utility (on this page, or in RMK Billing → Settings → Printers).
- If the browser asks, choose Keep (Edge: … → Keep → Keep anyway).
- Open RMKUtility.exe from your Downloads. If Windows shows Windows protected your PC, click More info → Run anyway.
- RMK Utility installs itself for your Windows user (in your own programs folder, no administrator needed), sets itself to start with Windows, and shows the RMK Billing icon by the clock. A note says RMK Utility is ready.
- Don’t see the icon? Click the ^ arrow by the clock for hidden icons. You can drag it next to the clock to keep it in sight.
RMK Utility for Windows
Version 1.3.0 · about 1 MB · Windows 10 and 11
- ✓ Free with every RMK Billing plan
- ✓ Installs for you in seconds, no administrator needed
- ✓ Starts with Windows and waits by the clock
Works only with RMK Billing. It prints what RMK Billing sends to it and nothing else: it is not a printer driver for other software.
Step 2
Connect it to your business
- In RMK Billing (on any device), the owner opens Settings → Printers, goes to Connect a computer and clicks Show the code. It looks like RMK-XXXX-XXXX-XXXX. Click Copy if you are on the same computer.
- On the computer with RMK Utility, right-click the RMK Billing icon by the clock → Connect with a code…
- Type (or paste) the code, give this computer a name everyone will recognise, like Counter PC or Workshop PC, and click Connect.
- In a few seconds the tray menu says connected to your business name. That’s it: this computer now takes prints whenever it is on.

Step 3
Add this computer’s printers
- On the computer with RMK Utility, open RMK Billing → Settings → Printers. The This computer box shows ● RMK Utility … connected and lists the printers Windows has here, with ● online or ○ offline.
- Click Add next to each printer you use for RMK Billing. RMK Billing guesses the paper (thermal roll, A4 / A5, dot-matrix, label) from the name.
- Check each printer: a short Name everyone understands (Billing thermal, Office HP), the Paper, On computer (this one), and Where it is (Cash counter).
- A network thermal printer that isn’t added in Windows: click + Printer by hand, choose Thermal roll, the computer that will send to it, and type its IP address (printed on its self-test page).
- Click Save, then Test print on each printer. A small test page comes out with your business name.


Step 4
Choose where each print goes
- Default printer for each paper: the thermal printer for roll designs, the office printer for A4 / A5. Every print follows its design’s paper unless you choose otherwise.
- Print types: pick a printer for any print type that should go somewhere else (for example job slips to the workshop printer). Blank = the default for its paper.
- Copies (1 to 5) for prints you need twice, like a customer copy and a shop copy.
- Print by itself after saving: tick it for bills, receipts and the like to print the moment they are saved. It is off until you tick it.
- Click Save. The set-up is kept online, so every computer, phone and tablet of your business uses it at once.

Step 5
Daily use
- Press Print on any bill, receipt, job slip or report. A note says Printed on Billing thermal (on the computer with the printer) or Sent to Billing thermal on Counter PC (from a phone or another computer).
- With Print by itself ticked, just save: the print starts by itself, once per document.
- The printing computer plays a short chime as each print starts.
- Keep the printer computers on during shop hours. RMK Billing doesn’t have to be open on them.
- RMK Utility starts with Windows. If you closed it, open it again from the Start menu (search RMK Utility).
Phones, tablets and more computers
- Phones and tablets need nothing installed. Their prints go to the printer’s computer as long as it is on with RMK Utility running.
- Another computer with its own printers (workshop, office): install RMK Utility there too, connect it with the same code, give it its own name, and add its printers from Settings → Printers on that computer.
- A computer without printers needs nothing: its prints go to the computer with the printer.
- One printer shared in Windows between computers: add it once, on the computer it is plugged into.
To see what a computer has printed, right-click the RMK Billing icon → Open the print station. It shows the business it is connected to, this computer’s printers and the prints since RMK Utility started. Close the window: RMK Utility keeps working.

Manage RMK Utility
Right-click the RMK Billing icon by the clock:
- Connect with a code… / Change the code… connect the computer, rename it, or type a new code.
- Open the print station shows the connection, this computer’s printers and its recent prints.
- Printers on this computer lists what Windows has, with offline printers marked.
- Sound when printing switches the chime on or off.
- Start with Windows is ticked when it is installed. Untick it only if you will start RMK Utility yourself.
- Close RMK Utility stops it until it is opened again or the computer restarts. Prints sent meanwhile open the print screen on the sending device.
In RMK Billing → Settings → Printers (owner):
- New code under Connect a computer cuts every connected computer off. Use it when a computer is lost, sold or replaced, then connect the computers you keep with the new code.
- Remove takes a printer out of the set-up. Print types that used it go back to the default for their paper.
- Untick Phones, tablets and other computers send prints to the printer’s computer to have every device print on its own instead.
To remove RMK Utility from a computer: right-click the icon → untick Start with Windows → Close RMK Utility, then delete the RMKUtility folder in %LOCALAPPDATA% (type it in the File Explorer address bar).
Security and privacy
- RMK Utility’s connection is print-only: it can see your printer set-up and the prints sent to its computer, and nothing else. No bills, customers, stock or accounts.
- Page images of a print are removed as soon as it is printed.
- On the computer itself, RMK Utility answers only RMK Billing’s own pages. Other websites and programs can’t use it to print.
- Only the owner sees the code, and a new code cuts every old connection at once.
- It works only with RMK Billing. It is not a printer driver and doesn’t change your printers or Windows settings.
Troubleshooting
| You see | Why | What to do |
|---|---|---|
| Settings → Printers says “RMK Utility isn’t running” | RMK Utility is closed, or not installed on this computer. | Open RMK Utility from the Start menu search (type RMK Utility), or download and install it again. Look for the RMK Billing icon by the clock (click ^ for hidden icons). |
| The tray menu says “not connected” | No code was typed on this computer yet, or the code was changed. | Right-click the icon → Connect with a code…, and type the code from Settings → Printers → Connect a computer. |
| “This code is not valid any more” | The owner made a new code, so the old one stopped working. | Get the new code in Settings → Printers and type it in Change the code… |
| A printer shows ○ Off now | That computer is off, asleep, not connected to the internet, or RMK Utility is closed on it. | Switch the computer on and check the RMK Billing icon is by its clock. Sleep stops printing: set Windows to never sleep on a counter PC. |
| “No printer called … on this computer” | The printer was renamed or removed in Windows, or it is on another computer. | In Settings → Printers, check Name in Windows matches the printer’s name in Windows → Printers & scanners, or Add it again from the list. |
| A printer is listed as offline | Windows can’t reach the printer: it is off, out of paper, its cable is out, or its network address changed. | Switch it on, load paper, check the cable. Print a Windows test page from Printers & scanners to be sure. |
| The print comes out too small or cut off | The printer’s paper size in Windows doesn’t match the design, or the wrong printer was chosen. | Use a print design made for the printer’s paper (80 mm roll, A4, A5). For a thermal printer, set its paper to 80 mm (or 58 mm) roll in Windows → Printing preferences. |
| A phone’s print opened the phone’s own print screen | No computer with that printer is online, or sending to computers is switched off. | Switch on the printer’s computer with RMK Utility running, and keep Phones, tablets and other computers send prints… ticked in Settings → Printers. |
| Windows says “Windows protected your PC” | RMK Utility is new, so Windows hasn’t seen it on many computers yet. | Click More info → Run anyway. It is safe: it only prints for RMK Billing. |
| The browser blocks the download | Some browsers hold back new programs. | In the downloads list choose Keep (Edge: … → Keep → Keep anyway; Chrome: Keep). |
Questions
Does RMK Utility work without RMK Billing?
No. It only prints what RMK Billing sends to it from your own business. It can’t print from Word, Excel, Tally or any other program, and it does nothing until it is connected with your business’s code.
Does it cost anything?
No. RMK Utility is free with every RMK Billing plan. Printing from a phone through a computer uses your internet like any other page.
Does someone need to sign in to RMK Billing on the computer with the printer?
No. Once it is connected with the code, RMK Utility takes prints whenever the computer is on, even if nobody has RMK Billing open there. Its own sign-in is printer-only and can’t see your bills.
Can it see my bills, customers or accounts?
No. Its sign-in can only see the printer set-up and the prints sent to that computer. The page images of a print are removed as soon as it is printed.
Which printers work?
Any printer that Windows prints a test page on: thermal receipt printers (TVS, Epson TM, Retsol and others, USB or network), HP, Brother, Canon and Epson A4 printers, dot-matrix printers, and label printers. A network thermal printer can also be reached by its IP address without adding it to Windows.
Do I need it on every computer?
Only on the computers that have printers. Phones, tablets and computers without printers send their prints to the computer with the printer.
What if I don’t install it?
RMK Billing still prints: the browser’s print dialog opens, and a note tells you which printer to pick for that print type.
Is there a Mac or Linux version?
Not yet: RMK Utility is for Windows 10 and 11. On a Mac or Linux computer RMK Billing prints with the browser’s print dialog.
Will it slow my computer?
No. It is about 1 MB, waits quietly by the clock, and works only when a print arrives.
Ready to print without the print dialog?
Download RMK Utility on the computer with your printers, connect it with your code, and add its printers in RMK Billing → Settings → Printers.
RMK Utility for Windows
Version 1.3.0 · about 1 MB · Windows 10 and 11
- ✓ Free with every RMK Billing plan
- ✓ Installs for you in seconds, no administrator needed
- ✓ Starts with Windows and waits by the clock
Works only with RMK Billing. It prints what RMK Billing sends to it and nothing else: it is not a printer driver for other software.
